View BP5843_932255.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

High-power LED Drivers for llumination
AC100V input, constant current
BP5843
Absolute Maximum Ratings
Parameter Input voltage Output voltage Withstand voltage Maximum surface temperature Operating temperature range Storage temperature range Symbol Vi Vo BV Tcmax Topr Tstg Limits 170 12 1.8 105 -20 to +80 -25 to +85 Unit V Vpk kV C C C DC
24.50.5
Dimensions (Unit : mm)
32.50.4 15.1Max.
1s (between primary and secondary) Ambient temperature + module self-heating Tcmax Refer to derating curve
4.01.0
1
345 0.50.1
9 10 11 0.250.05 4.5Max. 10.6Max.
P=2.540.2
2.61.4
2.54x10=25.4 (Typ.)
Electrical Characteristics
Symbol Min. Parameter Input voltage range 113 Vi Output current 332 Io Output voltage range Vo 2.5 Output ripple voltage - Vp Power conversion efficiency 80 Typ. 141 350 - - 85 Max. 170 369 12 0.5 - Unit V mA V Vp-p % Conditions Vi=141V, R1=0.82 (1%) Vi=141V, lo=350mA Vi=141V, lo=350mA Vi=141V, Vo=12V, lo=350mA
Derating Curve
5 Output Power (W) 4 3 2 1 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient Temperature Ta(C) Operation Range Derating Curve
1 Maximum output current varies depending on ambient temperature ; please refer to derating curve. 2 Spike noise is not included in output ripple voltage.
Application circuit
BP5843
BP5843
Be sure to use fuse for safety
F1 R1 D1 LF1 ZNR1 C3 C4 C5 + C1 C2
Pin No. 1 2 3 4 5 6 7 8 9 10 11 Function Input terminal (+) Skip Input terminal (-) NC NC Skip Skip Skip Output capacitor connection terminal LED connection terminal (cathode) LED connection terminal (anode)
Output Characteristics
0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 0 2 Output characteristics R1=0.91 Operation Range R1= Output Current (A)
1
3
9
10 11
4
6 8 10 12 Output Voltage(V)
MARKING SIDE
14
16
Setting current
Setting resistor : R1()
External components setting C1 : Input Capacitor C2 : Output Capacitor R1 : Output current setting resistor C3, C4: Noise Removal Capacitor C5 : Noise Removal Capacitor D1: Diode bridge F1: Fuse LF1: Line Filter ZNR1: Varistor 10F/250V 40F/25V Ceramics capacitor 0.82 1 % 1/4W (lo=350mA) Please use the capacitor, if necessary. Capacitance : 0.1F to 0.22F Rated voltage : 250V or higher 2200pF (Basic insulation) 800V/1A Fuse must be used for safety 10mH Varistor must be used. It protects this part from lighting surge and static electricity.
Output current-Setting resistor 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.24 0.26 0.28 0.30 0.32 0.34 0.36 Output current : (A)
How to calculate R1 R1=0.13741/(0.91 x lo-0.151) lo : Output current
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright (c) 2007 ROHM CO.,LTD.
THE AMERICAS / EUPOPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co. jp
21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121 FAX : +81-75-315-0172
Appendix1-Rev2.0

▲Up To Search▲

Price & Availability of BP5843

	To Download BP5843 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .